Safe operation procedure for conveyors in brick making machines

In the brick-free production line, the conveyor is one of the indispensable equipment. The safe operation of the conveyor is related to the operation of the entire production line. Pay attention to the following points during the use of the conveyor.

1. The fixed conveyor used with brick making machine should be installed on a fixed basis according to the specified installation method. The wheel should be wedged with a triangular wood or braked with a brake before the mobile conveyor is officially operated. In order to avoid moving in the work, when there are multiple conveyors working in parallel, there should be one meter between one the machine and another.

2. Before using the conveyor connected with auto brick machine, check whether the running parts, the tape buckle and the carrying device are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to an appropriate level before starting.

3. The belt conveyor should be started at no load. Wait until the operation is normal before feeding. It is forbidden to drive after entering the material first.

4. When several conveyors are operated in series, they should start from the discharge end and start in sequence. Only after all normal operation can the material be fed.

5. When the tape runs out during operation, it should be adjusted for parking, and should not be used barely to avoid wearing edges and increasing load.

6. The working environment and the temperature of the material to be delivered shall not be higher than 50 °C and lower than -10 °C. Do not transport materials with acid-base oils and organic solvents.

7. Pedestrians or passengers are prohibited on the conveyor belt and the QM block making machine.

8. Before stopping, you must stop the feeding, and then stop the storage on the belt before parking.

9. The conveyor motor must be well insulated. Do not pull and drag the mobile conveyor cable. The motor must be reliably grounded.

10. When the belt is slipping, it is strictly forbidden to pull the belt by hand to avoid accidents.