QT series brick machine inspection work must be strictly carried out

The QT series brick making machine checks the power problem before starting up. In order to ensure production safety and to avoid some non-human factors to damage equipment, such as animals inadvertently biting, which will bite off the wires. These problems need to be paid attention to, so check each wire before starting up, whether it is intact or not.

The QT series block making machine should check the mold and mold box for any debris before starting the machine. If there is snow in the evening, it will inevitably be thrown into the mold, and direct production will affect the brick size and affect the quality and strength. Clean the mold, or apply a layer of oil on the mold to prevent the material from sticking to the mold and reduce the output. The upper and lower molds should be aligned and installed and adjusted for production.

Secondly, the QT series brick making machine will install all the protective cover and floor cover before operation, and the safe operation should be placed in the first position.

Before the equipment is operated, clean up the personnel unrelated to the work at the site, especially the direction of the motor is strictly prohibited to avoid standing.

The QT series brick machine for sale can’t start the feeder equipment before it is turned on, avoiding the overload phenomenon and causing damage to the equipment parts.

It is especially reminded that the sealing net of the QT series brick making machine must be installed before operation. It is strictly forbidden for non-operators to approach or directly put the hand or debris into the sealing net to avoid equipment failure.

The QT series brick machine production line has a large workload and strong running power. For personal safety, safety measures must be placed first. Prepare daily before starting, and do a comprehensive check at regular intervals.