Belt maintenance of used mobile concrete batching plant

The belt conveyor undertakes the transportation work during the whole equipment operation of a used mobile concrete batching plant. Its working state has a very important influence on the efficiency of the whole process, and stable soil sticks onto it easily, causing a sharp drop in transportation efficiency. Thus its really crucial to have the conveyor belt maintained regularly.

Then, how to maintain the belt conveyor of a used mobile concrete batching plant? First, check the maintenance of the belt reducer. The operation of the reducer should be stable, the noise should be moderate. There should be no abnormal noise and no dust on the casing (especially the input and output shafts). The input shaft seal should have no oil leakage phenomenon. Make sure that the gear oil is sufficient and that the oil level should be above the red line of the finder (the gear oil grade is medium load extreme pressure industrial gear oil). Second, there should be no sand on each roller and roller of the belt conveyor, otherwise the wear of the roller and the roller will be accelerated, and the service life of the roller will be reduced. Third, the tailing hopper of the inclined belt conveyor should be cleaned at the extreme to prevent the sand from falling between the tail drum and the belt, causing early wear and debonding of the belt. Fourth, the belt of the flat belt reducer should be buttered in time.

Mobile concrete batching plants plays an irreplaceable part in modern construction. Owing to high prices of new sets, many people pay attention to used ones. However, a used mobile concrete batching plant should be maintained even more carefully, and when you are purchasing a used plant, the wearing state of its conveyor belt is an important point influencing its price.